Installation Guide

54
5 、 Installation method 5 、 Installation method
1、 2、
3、
5、
6、
4、
Open the triangular valve and rinse th
e deposit inside the pipeSediment, im
purities, when close the triangle valve
after the water flow is clean.
Install the faucet at the sink opening
as shown.
Find the corresponding part according
to the accessory drawing as shown in
the figure.fix the faucet on the sink.
Screw the water pipe on the hot an
d cold water pipe as shown below.
Open the triangular valve as shown
below. (Installed)
Install the shots in steps 1, 2, 3, and 4 as shown in the figure (the lower end of the
shot should be greater than or equal to 680 mm).
Min.680mmMin.680mm
4
3