User manual

MAINTENANCE
BEFORE ANY FORM OF MAINTENANCE, ALWAYS ENSURE THAT
THE UNIT IS DISCONNECTED FROM THE MAINS SUPPLY.
GLUEBOARD REPLACEMENT
The Flypod
®
utilises a patented* hygienic glueboard removal
system.
The glueboard should be replaced every four weeks.
To replace the glueboard (see adjacent diagram):
1. Position the Flypod
®
so the back is facing you.
2. Using one hand to support the unit use your thumb and
forefinger of your other hand to gently pull the
glueboard out through the oval slot in the back of the
unit. As you pull the glueboard out through the slot it will
close up on itself sealing in the flies.
3. Once the glueboard is free from the unit discard into a bin.
4. Slide a new glueboard into position as described on the
first page of this instruction sheet.
CLEANING
It is recommended that you clean your Flypod
®
every time you
replace the glueboard. Once the glueboard is removed,
thoroughly wipe down your Flypod
®
with a soft damp cloth,
removing any build up of dust or dirt.
TUBE REPLACEMENT
To ensure the optimum effectiveness of your Flypod
®
, the UV
tubes should be replaced every 9 months.
To replace the tube, remove the old tube by pulling it gently
out from the base (1) and push the new tube into the four
connection holes (2).
STARTER REPLACEMENT
The starter should be replaced at the same 9-month interval
as the tube.
To replace the starters release the used starter by turning
anti-clockwise and pulling free. Insert the new starters and
turn clockwise until locked in position.
R2 12/08
Glueboard Replacement
Tube Replacement
Starter Replacement
Unit Flypod
Voltage 240V - 50Hz
Dimensions (mm) W - 190 x H - 300 x D - 140
Coverage 50m
2
Weight 2kg
Light Output 18W
Tubes 1 x 18w PL (I815)
Starter 1 x S2 (I154)
Glueboard X6 White (INF252)
SPECIFICATION / REPLACEMENT PARTS
1. 2.
*Patent Applied
C
2008
P+L Systems Ltd
Information provided on these instructions is modified and
updated from time to time. This is due to the constant
redevelopment of our products. As such, it is not intended that
you should rely on it or that it should form part of any contract.
P+L Systems Ltd
Ten St James Business Park
Grimbald Crag Court
Knaresborough
HG5 8QB UK
T [phone]
F [phone]
W www.pandlsystems.com
E [e-mail]