User's Manual

18
FS-lT4S
Digital proportional radio control system
6.6 Throttle Exponential
This function has two variables:
□
Rate: Reducing the rate shrinks the outer limits of the curve, as the rate drops below 100% the graph
will update in real-time. The maximum is 100%.
□
Exp. (Exponential): Exponential adds curve, it is possible to move to +-100% creating opposite curves.
To reset this function select the standard steering mix from the functions main menu.
This function can be toggled using a switch/button, this is assigned in the "Keys function".
6.7 Throttle Curve
This function is used to add a curve to the throttle response, meaning that the throttle will respond
differently throughout its range of movement.
This function must be activated and can be assigned to a button (See "Keys Function"). To activate this
function press the icon located at the bottom left of the screen, once activated this icon should show a
tick.
This function has 5 points that can be edited. To select a point simply touch the corresponding number (L
is the lowest point and H is the highest point).
Once a point is selected use the wheel at the bottom of the screen to change its value, all changes will be
shown in real-time on the graph, if the trigger is moved the graph will show the current throttle position.
To reset this function press the reset icon located at the middle bottom of the screen.