User's Manual

25
7.8 Keys Function
This function assigns the systems physical buttons to different functions.
To assign a function to a key select the key from the diagram, then select a
function from the list.
WARNING
If the model engine is powered on while the test function is activated will
rev up.
To set the keys function:
1. Touch one of the trim or switches shown on the diagram.
2. Scroll down the list until you find the function you wish to assign and
select it.
3. Once the selection has been made the function will automatically
return to the previous menu.
7.9 Models
The models function is used to change between, copy and delete model setups. The FS-iT4S can store up
to 20 different models in the internal memory.
Selecting a model:
To select a model touch the select model menu, once in the menu touch the name of the model to load it.
Reset Model
To reset (delete model by resetting to default), first select a model from
the model selection menu (as shown above), then press the reset model
button. The system will ask for a confirmation before resetting the model.
Naming Models
To name a model, fist select a model from the model selection menu (as
shown above), then touch the name menu button which will bring up a
keyboard.
Once you have finished entering in the name using the keyboard press the
[Icon] to save.