User's Manual

31
10.0 System
10.1 Blacklight Timeout: (Time)
The blacklight timeout function controls how long the system will wait before turning off screens
backlight.
Note
Backlight time can affect the battery life of your system, the longer the time, the shorter the battery will
last.
To change the backlight time enter the function and select the desired time from the list.
10.2 Backlight: (%)
This function controls the backlight brightness. (Note: Increasing the brightness will reduce battery life)
To change the backlight brightness, use the wheel at the bottom of the screen to change the percentage.
10.3 System Sound
Toggles all system sounds (excluding alarms).
To disable the system sounds uncheck the box by touching it.
10.4 Alarm Sound
Toggles all alarm sounds.
To disable the alarm sounds uncheck the box by touching it.
10.5 Auto Power Off
The auto power off function powers off the system automaticly after 2 min, unless a receiver is connected.
To enable this function check the box by touching it.
10.6 Screen Calibration
If the touch screen is not functioning correctly, use this function to recalibrate.
To recalibrate once inside the function touch the centre of the crosses as they appear on the screen. The
system will exit the function once calibration is complete.
Note
It is recommended that you use the supplied stylus.