User's Manual

7
3.
GettingStarted
Before operation, install the battery and connect the system as instructed below.
3.1TransmitterBatteryInstallation
Danger
• Onlyuseincludedbatteries
Danger • Donotopen,disassemble,orattempttorepairthebattery.
Danger • Donotcrush/puncturethebattery,orshorttheexternalcontacts.
Danger • Donotexposetoexcessiveheatorliquids.
Danger • Donotdropthebatteryorexposetostrongshocksorvibrations.
Danger • Alwaysstorethebatteryinacool,dryplace.
Danger • Donotusethebatteryifdamaged.
The NB4 has 2 batteries, one located in the handle and one in the removeable base.
To attach the base:
1. Line up the base so that the transmitter handle has a slight over hang on the back.
2. Carefully insert the base contacts into the hole in the bottom of the handle.
3. Hold the handle 󽗉rmly and pull the battery backwards. When it is secure you should hear
a click.