User's Manual

15
6.13ThrottleIdleUp
Throttle Idle Up is used for models that use a fuel based engine that will stall
if left at 0 throttle. Idle up makes sure that the engine always has some
throttle in order to keep it from stalling.
This function must be assigned to a switch/button in order to be activated
(See [Buttons Assign]). If not, the function cannot be activated.
Setup:
1. Assign the Throttle Idle Up function to a button. For more information on this see the
[Buttons Assign] section of this user manual. Now when the button is press it will toggle
Throttle Idle Up on and o󽗈.
2. Use the + and - icons to change the percentage.
3. Test to make sure everything works as expected.
6.14EngineCut
When Engine Cut is triggered via a button it sets the throttle channel to a predefined
position.
This function must be assigned to a switch/button in order to be activated
(See [Buttons Assign]). If not, the function cannot be activated.
Setup:
1. Assign the Engine Cut function to a button. For more information on this see the
[Buttons Assign] section of this user manual. Now when the button is press it will toggle
Engine Cut on and o󽗈.
2. Use the + and - icons to change the percentage.
3. Test to make sure everything works as expected.