User's Manual
19
This function is used to protect the models and users if the receiver loses signal and
therefore is no longer controllable.
Setup:
1. Select a channel by touching the box to the right of the channel name. The box will be
highlighted in green when selected.
2. Move the channel to the desired location, hold it in that position, then press the
icon.
To set all channels at the same time, touch "All Channels", move all the channels and
hold them in the desired location, then press the icon to save.
7RXSetup
7.1BindWithAReceiver
To bind with a reciever:
1. Put the receiver into bind mode (Check the receiver's user manual for your receiver on
how to enter bind mode).
2. Touch "Bind With A Receiver" in the RX Setup menu. The NB4 will now bind with the
receiver and exit automatically when binding is complete.
7.2Failsafe