i ap The FYB receiver adopts Fly sky's third-generation automatic frequency a fn hopping digital system (AFFORDS 3), which features dual antennas bidirectional data transmission commonly known as telemetry plus an Hus | SARI CHL ECT PWM/PPM #138, SEW ore bus terminal and PWM/PPM switching a Channel 1 Compatible with a AFHDS3 RENTS, AFFORDS 3 transmitters and RF modes.
FLED 1, Press al hol the receiver BIND button [14] while powering on the receives release the BIND bunion after receiver is powered on, the LED 13] on the silverware lash rapidly; 2. Puttee transmitter nto bind mode; 3. The binding process is complete when the LED on the receiver stops fishing and is on continuous, + transmitter that has had fs radio frequency (RF Standard) sek to *AFHDS3 Way” (please refer to your transmitter user manual) enters bind mode, the receiver LED will instead flash silty.
EET FCC Compliance Statement “This device complies with Part 15 of the FCC Rules. Operation i subject to the following two conditions: (1) this device may nok cause noninterference, and (2) ths device ust accept any interference cave, including interference that may cause undesired operation. Warning; changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to ‘operate the equipment.