User's Manual
13
6.5 Alarm for battery power
This receiver provides an alarm for the battery power level. You can observe the color of the LED
indicator on the transmitter to learn about the battery power level in real time. When the battery
power level is too low, you need to charge in time.
• When the battery power level is high, the color of the LED indicator is green, and the LED
indicator is always on.
• When the battery power level is medium, the color of the LED indicator is orange, and the LED
indicator is always on.
• When the battery power level is low, the color of the LED indicator is red, and the LED indicator
is always on.
• When the battery power level is ultra-low, the color of the LED indicator is red, and the LED
indicator is in flashing slowly state.
Notes
: (1) When the battery power level is ultra-low, the throttle of the model car has no output,
but the direction can be controlled.
(2) When the battery power level is not ultra-low, the model car can be controlled normally.
6.6 Car light control
The car light control is mainly implement the changeover of lighting states and lighting modes by
setting the transimitter.
1. Car light control
The left and right turn signal lights of the model car are controlled through rotating the hand wheel
of the transmitter, while the headlight control is done by toggling the CH3 key on the transmitter.
• When the hand wheel is rotated clockwise or counterclockwise, i.e. when the model car is
turned to the left or right, the turn signal light is in a slow flashing state.
• When the CH3 key on the transmitter is located at the leftmost end, the headlight is off. When
the CH3 key is located at the middle position, the headlight is on. When the CH3 key is located at
the rightmost end, the headlight is in a fast flashing state.
2. Modes of the car light control
Press CH4 button on the transmitter to switch the working mode of the car light control. One mode
is switched while you press the CH4 button once. That is, turn signal light mode, emergency light
mode, sharp flash mode and off mode are switched in turn.
• Turn signal light mode: In this mode, the turn signal light is in a slow flashing state when the
model car turns. The turn signal lights are always off when the model car doesn't turn.
• Emergency light mode: In this mode, the turn signal lights are in a synchronous and slow
flashing state regardless of whether the model car turns or not.
• Sharp flash mode: In this mode, the turn signal lights are in a synchronous and fast flashing
state regardless of whether the model car turns or not.
• Off mode: In this mode, the turn signal lights are always off regardless of whether the model car
turns or not.
Note:
Every time the receiver is turned on, the mode of the car light control is in turn signal light
mode.
6.7 Failsafe
This function is used to protect the safety of the model and the operator when the receiver cannot
normally receive the signal from the transmitter and is out of control. The receiver defaults that
the throttle channel is fixed to be out of control and enters the brake state. After other channels
are out of control, the receiver has no signal output. If you set it on the transmitter, it will output
according to the set value.