User's Manual

3.Getting Started

Before operation, install the battery and connect the system as instructed below.

3.1 Transmitter Battery Installation

Danger

• Only use specied battery (X4 AA batteries).

Danger

• Do not open, disassemble, or attempt to repair the battery.

Danger • Do not crush/puncture the battery, or short the external contacts.

Danger

• Do not expose to excessive heat or liquids.

Danger

• Do not drop the battery or expose to strong shocks or vibrations.

Danger • Always store the battery in a cool, dry place.

Danger • Do not use the battery if damaged.

Battery Type: AA

1. Open the battery compartment cover.

2. Insert 4 AA batteries with the correct polarity. Make sure it is connected with the correct polarity to avoid damage.

3. Replace battery compartment cover.

Low battery alarm: When the battery is lower than 4.2v, the G.LED on the panel will flash slowly.