Manual

ManualsBrandsFlytec ManualsSensors4030 *

Transmission to a PC

The flights recorded can be transmitted to a PC. You will require a PC with Windows 3.X or

Windows® 95, a PC cable and Flytec’s software.

Transmission is started from the PC Software FlyChart. It is required that the instrument is in

the run mode on the MEMO display (fligth 0). The entire flight memory is then transmitted to

the PC where the flights can be saved and printed out. The PC software can be used to print

out a colour graphic of the barogram VARIO, SPEED and TEMP data.

Barograph setting mode

In setting mode, all flights in the logbook can be

deleted and the recording interval of the barograph

can be set.

In setting mode, the recording interval saved is dis-

played first. Using the key or the key, chan-

ge in the MEMO display between the recording

intervals 1, 5, 15 sec and CI. Briefly press MEMO

to save the interval displayed and thus leave set-

ting mode.

If Cl appears in the MEMO display, all the flights

can be deleted by pressing the key for 4

seconds. As soon as the memory has been dele-

ted, all the segments of the display will flash brief-

ly and the instrument starts up again.

Barograph option mode

The magnitudes which the barograph is to record

are set at the first level of option mode.

Use the key or the key to toggle between

the different possibilities. The magnitudes to be

recorded flash in the display:

• ALT 1 and SPEED Altitude and speed

• m/s ft/min x 100 and SPEED Ascent and speed

• ALT 1 and TEMP Altitude and temperature

• ALT 1 Altitude only

The printer emulation must be given at the

second level of the OPTION mode:

EP  Epson FX-80

Ibm  IBM Proprinter

HP  HP Deskjet

Flytec

Operating Instructions FLYTEC 4030 28

SET-MODE

• Intervalle des enreg.

1, 5, 15 sec.

• Clear Barographe

(ALT 4 sec.)

OPTION-MODE

Recording

• ALT1 & SPEED

• Vario & SPEED

• ALT1 & TEMP

• only ALT1

Printer emulation

Epson - IBM - HP

Printout width

Norm - Cond

Name

21 Characters

MEMO

MEMO 4Sec.

OPTION

MEMO

OPTION

➀

➁

➂

➃

START - STOP

RESET

CLEAR ALT 2

ALT 1

ALT 2

CHRONO

START - STOP

RESET

CLEAR ALT 2