Owner's manual

Calibrating the temperature sensor
A false temperature display reading can be
corrected.
Holding down the ●
▲
key (8 seconds) will
change from the main menu to Option mode.
The currently set correction value for the tem-
perature will flash on the display.
The ●
▼
key can be used to reduce the value
and the ●
▲
key increases it. Press the key
briefly to alter the display in 1° C increments.
If the display is too high, the correction value
must be entered as a minus value; if it is too
low, the correction factor must be entered as
a plus value.
E
15
Temperature display Temperature display
Set mode Option mode
Correction value
for the temperature
Resetting the Windchill display
Holding down (3 seconds) the ●
▼
key will reset
the windchill display. All LCD segments are
displayed. Release the key to return the
display to the main menu.
Zeroing the
windchill display