User's Manual Part 2

J2 680 System Manual
Version 1.0 May 11, 2012
41
Exit Options
After making any changes to the BIOS settings, the changes can be saved from this
screen. Any changes can be discarded as well or the factory BIOS defaults can be loaded.
Typ
setting to the factory defaults.
It should be noted that to save changes to the BIOS setup the F10 key can be typed from
any screen to save the BIOS changes. It is not necessary to exit setup from this screen.
To discard any BIOS setup changes you can type the ESC key from any screen to exit.
Exit Options Screen