User's Manual Part 2

J2 680 System Manual
Version 1.0 May 11, 2012
61
If a hot spare is available, all that needs to be done is to swap the bad drive with the hot
spare. Be sure to change the correct drive. SATA Ports 0 corresponds to the HDD 0, the
top drive in the HDD bay and SATA Ports 1 corresponds to the HDD 1, the bottom drive
in the HDD bay.
Power to the system does not need to be turned off, and the system will still operate.
First remove the bad drive. After removing the bad drive insert the hot spare into the 680.
In the Intel Matrix Storage Manager select Advance Mode, and under the Action tab
Rescan for Plug and Play Devices screen shot
This will cause the drive to be detected by the driver.
Drive detected