User's Manual Part 2

J2 680 System Manual

Version 1.0 May 11, 2012

SATA Configuration

In this screen the SATA hard drives can be set to work in one of three modes, SATA,

RAID or AHCI.

When set to SATA, the SATA drive works the same as a normal IDE HDD. This is the

IDE compatible mode and default BIOS setting. The other two selections are RAID and

AHCI modes. Please see the separate section in the manual for RAID Setup for further

information on using RAID and AHCI modes.

SATA Configuration Screen