User's Manual Part 2

J2 680 System Manual

Version 1.0 May 11, 2012

Power Configure Screen

Restore on AC Power Loss

The 680 has three options should AC power become lost and then restored. There is

Power Off (stay turned off), Power On (turn on when AC restored), or Last State. The

Last State setting will cause the unit to turn on if it was on when AC power was lost or it

will stay off if the unit was off when AC power was lost.

Wake on LAN

Wake on LAN is enabled by default but can be disabled in this screen.

RTC Configuration

The RTC has an alarm function that can be used to turn the 680 on at a preset time of

day. This function is enabled by this setting. The wake up time can also be set here.

J2 also has available a utility to set the wake-up time from Windows. This is more

versatile than the BIOS setting as it allows for more than one time of day to be set as well

as days of the week to turn on.