User Manual

46
3-7 Resetting the Mobile System
The mobile system provides functions of “Reset to the factory default settings”
and “cold boot”. The detail procedures as bellows:
3-7-1 Reset to the Factory Default Settings
1. Use a tool to gently press the “Reset Hole” on the rear of the Mobile
System while keep holding down the “Power Button” throughout until
the system vibration occurs.
2. Release the “Reset Hole” and press the “Power Button” the second
time after the system vibration occurs.
3. The calibration instruction window will pop up to lead you to the
“Reset to the factory default settings”.
4. Completing the “Calibration window” instructions.
5. Press “Yes” to accept the “reset”.
6. Click “Yes” to confirm again.
7. System rest window appears as above far right picture.