User Manual

Switching between Admin mode and User mode

There is a control box in control panel applet, named - “Password”, The

Manufacturer redefine the password policy of WindowCE standard. The

password control box should input the password in advance to enter the page

for finding the selection items of changing the operating mode and/or reset

the default password. The default password is “1111”.

Step:

1. Find Password control box from control panel applet.

2. Enter password: “1111” (Default)

3. Select User mode or Admin mode.

4. Type the “OK” button of password properties control box.

5. Type the “OK” button of “Mode Chang” dialog for double confirmation.

6. System would reboot automatically to the selected mode.

How to use this feature?

System Integrator only has to copy the desired files to the working folders of

each mode.

It is impossible to change the operation mode by reset system to factory

default.

In case user forgets the password. The only way to achieve the password is

to run the Manufacturer maintenance application by copying the application to

SD card and cold reset the device.

Step:

1. Copy the desired files to the working folder of the operation mode

2. Follow Section “Switch the operation mode between Admin mode and

User mode” to switch operation mode.