User's Manual

Switching between Admin mode and User mode

There is a control box in the control panel applet, -"Password" The default

password is "1111".

Step:

1. Find Password control box from control panel applet.

2. Enter password: “1111” (Default)

3. Select User mode or Admin mode.

4. Type the “OK” button of password properties control box.

5. Type the “OK” button of “Mode Chang” dialog for double confirmation.

6. System would reboot automatically to the selected mode.

How to use this feature?

System integrators only have to copy the desired files to the working

folders of each mode.

It is impossible to change the operation mode by resetting the system to

factory defaults.

In case the user forget the password. The only way to retrieve the

password is to run the Manufacturer maintenance application by copying

the application to a SD card and cold resting the device.

Step:

1. Copy the desired files to the working folder of the operation mode

2. Follow Section “Switch the operation mode between Admin mode and

User mode” to switch operation mode.