User's Manual

59
remove the registry key is to put empty to the key value in the config file.
System.cfg – Using for early registry initialization stage at booting phase.
Oem.cfg – Using for system registry initialization stage at booting phase.
 Example:
- Overwrite the factory default backlight level setting.
1. Create a file directory “GHARST” in root folder of SD card.
2. Change into “GHART” folder to create directory “configfiles”.
3. Prepare the oem.cfg config file by text editor.
Input following setting:
[HKEY_CURRENT_USER\ControlPanel\BackLight]
"BatteryBacklightLevel"=dword:7
"ACBacklightLevel"=dword:A
4. Copy oem.cfg file into “configfiles” folder.
5. Put SD card into the SD socket on device.
6. Use OEM Device Manager to merge all files in “GHARST” folder in SD
card into device. After the integration process, all OEM desired settings
will be the system default settings of device.
- Overwrite the default WiFi state to power on mode. (Default is
power down)
1. Create a file directory “GHARST” in root folder of SD card.
2. Change into “GHART” folder to create directory “configfiles”.
3. Prepare or modify the oem.cfg config file by text editor.
Input following setting:
[-HKEY_LOCAL_MACHINE\Comm\NdisPower]
4. Store oem.cfg file into “configfiles” folder.
5. Put SD card into the SD socket on device.
6. Use the OEM device manager to merge all files in “GHARST” folder in
SD card into device. After the integration process, all OEM desired
settings will be the system default settings of device.
- Remove a registry key from the registry in factory default settings
Set the key to empty. Factory manager will remove the specific key from
the default system registry.
Example:
[HKEY_LOCAL_MACHINE\RegistryKey]
"ValueName"=