User's Manual

16
3-3 Replacing the Battery
1. Power off the tablet. Unplug the AC cable
if connected directly to the DC-in port on
the tablet. Place the tablet face down on
a flat surface. Next, slide the latches up as
shown to unlock and release the battery
cover.
2. A plastic tab is attached to the battery
module. For easier removal pull the
plastic tab upwards to release the battery
from the unit.
3. To install the battery cover, angle the
battery cover so that the left side is
inserted first into the battery compartment.
Then press into place and slide the latch
downward to lock the battery cover.
Note: When closing the battery cover, follow the
number shown in the picture to press the cover
until it snaps into place.