User's Manual

2. Connect the cable to the connector on the system side.

3. Insert the peripheral module in place and fasten the screws (x4) on the back to secure

the module.

Note: The variety of peripheral kits (MSR, VP3300, Augusta, Ingenico, and Mini Smart Card II)

all follow the same installation method.

3-5 Using the Charging Cradle

1. To charge your M284 tablet, slide it into

the cradle slot. Then connect the AC

adapter to the DC-in input and connect

the other end to the power outlet.

3-6 Attaching the Hand Strap

1. Align and attach the hand strap to the

back side of the tablet and fasten the

screws (x2) to secure it.