User's Manual

5
3. System Assembly & Disassembly
3-1.
Install the Power Adapter
3-2.
Remove the System Box
The system is equipped with a 90W power adapter. Please plug it into the system as
shown below.
1. Find the DC-in connector located on
the bottom of the system.(refer to
Chapter 2-3 c).
2. Plug the cable directly into the
connector then plug the adapter
directly into the AC outlet.
1. Lay down the system to access
the bottom of the stand.
2. Remove the screws (x2) and
pull the holder of the system
box outwards.
3. Disconnect the cable of the LCD
panel.