User's Manual

10
4-4.
Install the Customer Display
2. Connect the customer display cable
(x1) to the connector on system side.
3. Attach the customer display and fasten it into place with the screws (x2) provided.
1
2
1
2
1. To install the customer display, replace the hinge cover with the one which has a
opening in the top.
Removing the hinge cover: The cover attaches magnetically to the hinge. Pull the
cover upwards and out to release it from the hinge.
Installing the hinge cover: To install the hinge cover, attach the cover and slide it
into place.