Owner manual

Leave the TTX402
unpowered.
Push and slide to open
the charger cover.
Illuminated green light indicates charging.
(It may be necessary to cycle the on/off switch
to begin charging.)
Insert battery to charge.
Make sure the battery
plug is oriented properly
before inserting.
5
CHARGE THE 3.7V 140MAH LIPO BATTERY
Do not use the charge feature while flying the Micro Tiger Moth!
1. Install the (5) AA batteries in the included 1S charger using
the diagram shown in the battery compartment.
2. Plug the 3.7V battery in to the charger as shown. The
illuminated LED indicates charging.
Warning: Do not connect the battery other than in the
orientation shown!
3. When the LED goes out, charging is complete.
TX-R ONLY: CHARGE THE 3.7V 140MAH LIPO BATTERY