Owner manual

Keep hands clear of propeller during battery installation and removal.
Use two fingers to secure
connector during battery
installation and removal.
Connect the LiPo to the lead. Press battery into
place to secure.
Right stick moves left, rudder
moves left, causing the aircraft
to turn to the left.
Right stick moves down, elevator
moves up causing the aircraft’s
nose to pitch up, gaining altitude.
7
INSTALLATION AND REMOVAL OF THE LIPO BATTERY
CHECK THE CONTROL SURFACE DIRECTION
Disconnect and remove the battery after use by holding the battery lead with two fingers and removing the battery
from the lead with the other hand. Do not yank or jerk the battery from the aircraft. This could dislodge the RX
board from the Micro Tiger Moth.