Manual

Install the Vertical and

Horizontal Stabilizer

❏

1. Flex the elevators up and down a few times to loosen

them up so they move easier.

❏

2. Repeat the process to loosen the rudder.

❏

3. Insert the rudder control arm through the V-bend in the

elevator joiner wire. Note that the plastic plate is on top of

the stabilizer.

❏

4. Insert the three guide posts into the three recesses in

the top of the horizontal stabilizer.

❏

5. Slide the assembly into the recess in the top of the

fuselage. Then, press the assembly down to seat it against

the fuselage.

❏

6. Insert the 3 x 25mm machine screw into the hole in the

bottom of the fuselage. Thread the 3 x 25mm machine screw

through the horizontal stabilizer and into the bottom of the

vertical ﬁ n.