Manual

7
Connect the Rudder and
Elevator Controls
❏
1. If you haven’t yet done so, familiarize yourself with the
Tactic TTX600 radio control system by reading the instructions
starting on page 16.
❏
2. Use a needle-nose pliers to unsnap the Faslinks from
the rudder pushrod.
❏
3. Insert the pushrod in the inner hole of the rudder control horn.
❏
4. Re-install the Faslink on the pushrod. Use a needle-nose
pliers to snap the Faslink onto the wire.
❏
5. Repeat the process to install the elevator pushrod in the
outer hole of the elevator control horn.