User Manual

5
ASSEMBLE THE SENSEI
Install the Main Landing Gear
❏
Attach the main landing gear to the fuselage using two
3x16mm sheet metal screws. Note that the landing gear is
angled forward.
Install the Vertical and
Horizontal Stabilizer
❏
1. Flex the elevators up and down a few times to loosen
them up so they move easier.
❏
2. Repeat the process to loosen the rudder.
❏
3. Insert the rudder control arm through the V-bend in the
elevator joiner wire. Note that the plastic plate is on top of
the stabilizer.
❏
4. Insert the three guide posts into the three recesses in
the top of the horizontal stabilizer.
❏
5. Slide the assembly into the recess in the top of the
fuselage. Then, press the assembly down to seat it against
the fuselage.