Instruction Manual

3
We, as the kit manufacturer, provide you with a top quality,
thoroughly tested kit and instructions, but ultimately the
quality and fl yability of your fi nished model depends
on how you build it; therefore, we cannot in any way
guarantee the performance of your completed model,
and no representations are expressed or implied as to the
performance or safety of your completed model.
ADDITIONAL ITEMS REQUIRED
Radio Control System
❏
(8) AA batteries will be required to operate the
transmitter (FUGP7308).
Additional Battery and
Charging System (Optional)
The LiPo battery charger included with your Piper Super Cub
RTF is a simple, safe, entry-level charger that charges at a
rate of 800mA. The capacity of the included LiPo battery is
1300mAh, so this works out to an approximate charge time
(for a discharged battery) of 1 hour, 37 minutes (1300mAh
divided by 800mA = 1.625 x 60 minutes = 97 minutes). But
some pilots prefer to have several batteries and charge them
faster so they can fl y more. For charging up to four batteries
faster (60 minutes) all at the same time, the Great Planes
PolyCharge4
™
DC-powered LiPo charger (GPMM3015) is
recommended. But unlike the included ElectriFly charger,
the PolyCharge4 does not have an internal LiPo cell
balancer which is a critical component in making sure your
LiPo batteries charge effi ciently and evenly. So, for each
LiPo battery you wish to charge simultaneously, one Great
Planes Equinox
™
LiPo Cell Balancer (GPMM3160) will also
be required. Finally, the PolyCharge4 does not have AC
capability, so if wall-charging is a priority a separate A/C
12-Volt power source must also be purchased separately.
A suitable power supply for the PolyCharge4 is the Great
Planes 12V 12A DC power supply (GPMP0901).
Required Assembly Tools
Other than common hobby tools this is the list of adhesives
and building supplies that are required to fi nish the Cub.
❏
Small needle-nose pliers (HCAR0625) or hemostats
(BRUR1302)
❏
#1 Phillips screwdriver (DTXR0174)
❏
Thread-locking cement (GPMR6060)
❏
Small crescent wrench
❏
Great Planes stick-on lead weight (Optional, GPMQ4485)
ORDERING REPLACEMENT PARTS
Replacement parts for the Hobbico Flyzone Super Cub
are available using the order numbers in the Replacement
Parts List that follows. The fastest, most economical service
can be provided by your hobby dealer or mail-order company.
To locate a hobby dealer, visit the Hobbico web site at www.
hobbico.com. Choose “Where to Buy” at the bottom of the
menu on the left side of the page. Follow the instructions
provided on the page to locate a U.S., Canadian or
International dealer.
Parts may also be ordered directly from Hobby Services
by calling [phone], or fax at [phone], but full
retail prices and shipping and handling charges will apply.
Illinois and Nevada residents will also be charged sales tax.
If ordering via fax, include a Visa
®
or MasterCard
®
number
and expiration date for payment.
Mail parts orders and payments by personal check to:
Hobby Services
3002 N. Apollo Drive, Suite 1
Champaign, IL 61822
Be certain to specify the order number exactly as listed in
the Replacement Parts List. Payment by credit card or
personal check only; no C.O.D.
If additional assistance is required for any reason, contact
Product Support by telephone at [phone], or by
e-mail at [e-mail].
Order No. Description
NOTE
REPLACEMENT PARTS LIST
Full-size plans are not available.
You can download a copy of this
manual at www.hobbico.com.
HCAA6310
HCAA6311
HCAA6312
HCAA6313
HCAA6314
HCAA6316
HCAA6317
HCAA6318
HCAA6319
HCAA6320
HCAA6321
HCAA6322
GPMM3318
TACJ0403
TACL0624
11.4V LiPo 1300
Fuselage
Wing
Stabilizer
Vertical Fin
Wing Struts
Landing Gear
Brushless Motor
8x4 Propeller
18 AMP ESC
Servo
Tail Wheel
3S LiPo Smart Balancing Charger
TTX404 2.4 GHz 4-Channel Transmitter
TR624 2.4 GHz 6-Channel Receiver