Water Pump User Manual

Doc No: OMM50000903
Rev: B Page 39 of 65
Subject to contractual terms and conditions to the contrary, this document and all the information contained herein are the confidential and exclusive
property of FMC Technologies, and may not be reproduced, disclosed, or made public in any manner prior to express written authorization by FMC.
Figure 11: Mandrel Tool in use
The lower part of the mandrel and the collets are passed through the valve seat and
then slid down the mandrel to expand them. The o-rings keep the collets on the
mandrel. The tension is applied in the same way as was done for the Eccentric Disc
type.
Threaded Mandrel
Valve Seat, Fluid Cylinder not shown
Expanding Collets
O-Rings
Threads on the inside diameter to
connect to the tension member