Manualshelf

User Manual

ManualsBrandsFMS ManualsAirplanesPiper J-3 Cub 1400mm PNP V4 with Floats and Reflex
12345678910
KA2.0*8
6
EN
Model assembly
Horizontal stabilizer installation
1.Secure the horizontal stabilizer using included screws as
shown.
1.Make sure the servos are in the neutral position. Install the
linkage rod to elevator control horn as shown. Secure the linkage
rod in place using the included screw as shown.
Linkage rod installation
1.Slide vertical stabilizer in the rear of the fuselage.
2.Secure the vertical stabilizer using included screws as shown.
Vertical stabilizer installation
KA2.0*8
KA2.0*12