Manual

Table Of Contents

Main wing installation

Horizontal stabilizer installation

Model assembly

1.Slide the tube into the fuselage then install both wings over the

wing tube and into the wing slot of the fuselage.

Note: The connectors on both sides should be attached precisely

and firmly.

1.Connect the elevator servo connectors to the servo exten-

sions in the fuselage.

2.Slide the horizontal tail in the rear of the fuselage. Ensure the

control horn faces down as shown.

2.Secure the both wings into the fuselage using the included 4

screws.

HKM3.0*16 Black