user manual

3
Before assembly, please inspect the contents of the kit. The
photo below details the contents of the kit with labels. If any
parts are missing or defective, please identify the name or
part number (refer to the spare parts list near the end of the
manual) then contact your local shop or email us: support
Kit contents
A: Fuselage
B: Main wing set
C: Horizontal stabilizer
D: Vertical stabilizer
E: Nose cone and drop tank
F: Screws (2-HKM3.0*32MM,4-HKM3.0*16MM)
G: Wing tube
Introduction
Kit contents
Model assembly
Battery installation
Receiver diagram
Preflight check
Clevis installation
Control horn and servo arm settings
Center of gravity(CG)
Before flying the model
Flying course
Troubleshooting
Spare parts list content
Table of contents
·····························································
·····
3
·························································3
·······················································4
············································· ········ 7
·········································
··
········ 7
··································
·····
·····
·····
·····
7
············································
··
··
·········· 9
·················
·················
········· 9
··············································· 9
··············································10
···························································10
······················································11
············································11
Introduction
Committed to the design and production of cutting-edge scale
model aircraft, FMS has dedicated an extraordinary amount of
effort in the design of the Yak-130 V2 to ensure that it’ll also be
at the pinnacle of model aviation.
Finding a balance between scale and performance has always
been a challenge, it took numerous prototypes, test flights and
modifications to refine the Yak-130 V2 into its final form- FMS
is confident that this is the most accurately defined Yak on the
market today.
Small details such as the plastic leading edge of the air intake,
which reduces turbulent airflow and protects the air duct from
debris, are implemented onto the airframe. The panel lines,
cockpit interior, scale pilot and even the auxiliary fuel tanks are
made with significant attention to detail. Even the way the
aircraft is assembled has been optimized- with a screw-together
airframe, it’s now possible to build the Yak-130 V2 in the time
it takes to charge the flight battery.
Utilizing the FMS 70mm 12-bladed EDF unit, Predator
2860-1850KV motor and a 80A ESC, the Yak-130 V2 has more
than enough thrust to tackle the most demanding of maneuvers.
Strong，upgraded metal landing gear set provide added
support and strength to absorb the impact of less-than-perfect
landings. All servos are pre-mounted and are optimized for this
aircraft- ensuring absolute reliability and maneuverability.
Don’t settle for any less than the best- FMS Yak-130 V2.
Wingspan: 880mm(34.6in)
Overall length: 1060mm(41.7in)
Flying weight: ~ 1850g
Motor size: 2860-KV1850
Wing load: 100g/dm²(0.23oz/in²)
Wing area: 19dm²(294.5sq.in)
ESC: 80A
Servo: 9g Servo x 8
Recommended battery: 22.2V 2600-3300mAh 35C
Specifications
@fmsmodel.com.
F.
G.
E.
A.
B.
D.
C.
• Upgraded and detailed metal landing gear set for added
support and strength
• Metal-geared servos for precise and accurate control
surface movements
• Scale details- pilot figure, auxiliary fuel tank, retractable
landing gear and flaps
• Retractable landing gear system
• Fully functional flaps
• Ball-linked control horns for precision maneuvers
• Latch-type canopy
• Simplified assembly methods
• Water-based, environmentally-friendly paint for more vibrant
colors
• 70mm 12-bladed fan provides high power-to-weight ratio