Manual

6. FIRING SINGLE SHOT
-
-
-
-
-
-
Insert a filled magazine.
Use the tip of a cartridge to push the plunger
in the gas plug fully down and hold it in this
position (fig. 22).
Turn the cartridge and the gas plug 180” so
that the letter “G” appears on top, instead of
the letter “A”.
Let the plunger return to its housing (the notch
in the plug is towards the bottom).
Carry out the loading operations (see page 14).
After firing each shot, repeat the loading ope-
rations.
7. FITTING THE BLANK FIRING DEVICE
- This device is to be screwed on the tapped end
of the combined device (fig. 7).
8. GAS REGULATION
The purpose of the gas regulator is to ensure
correct functioning of the rifle with maximum gas
escape, or, in other words, the minimum intake
17