Manual

4. PREPAkATlON OF RIFLE BEFORE FIRING
The L. A. R. functions with very little or proc-
ticolly no lubrication.
Before firing, wipe off any oil remaining on bar-
rel and gas cylinder surfaces; if the piston and
chromed part of the gas plug have been slightly
oiled, dry clean these too.
The tabulation given below gives on one side
the list of parts which can be slightly oiled, on the
other the list of parts which require no oiling and
which, in some cases, can be adversely affected,
if oiled.
Components,
or ports of components,
which wtll be very slightly oiled
Components,
or parts of components, which
will not be oiled before firing
OILED
-
Inside breech block slide.
- Breech block, ot locking
shoulders.
- Body, at bottom ond
olong guide grooves for
slide.
-
Holding open device.
LEFT DRY
- Barrel.
- Gos cylinder.
- Piston.
i chromed
- Gos Plug. ) ports
- Outer surface of slide.
- Front face of breech
block.
-
Mogorine and plotform.
- Magazine catch
- Sights.
41