Owner’s Manual 2020

41
6. Release the slide and allow it to
travel forward. Test the functions
of the pistol to ensure the slide
stop, trigger, magazine release
and manual safety, if provided,
are functioning correctly
(Figure 52).
The pistol is now fully reassembled
and is ready to be loaded and fired.
11.3 BACKSTRAP REMOVAL
1. Using a small 5/64" roll pin punch, push out the backstrap
retaining pin (Figure 53).
2. Slide the backstrap off the frame (Figure 54).
FIGURE 52
Assembled pistol.
FIGURE 54
Backstrap removal.
FIGURE 53
Backstrap pin removal.