Owner’s Manual 2020

11.4.1 MAGAZINE REASSEMBLY

1. If removed, assemble the follower

on to the magazine spring.

2. Insert the magazine spring and

follower into the magazine body

with the angle of the follower

matched to the angle of the top

of the magazine (Figure 61).

3. Using the floor plate catch with

the tab protruding down (away

from the magazine spring) compress the magazine spring into the

magazine body until the spring and floor plate catch are inside of the

magazine body (Figure 62).

4. Slide the floor plate onto the magazine body until it is seated against

the front of the magazine body (Figure 63).

FIGURE 61

Magazine assembly.

FIGURE 62

Install floor plate catch.

FIGURE 63

Install floor plate.