Owner’s Manual 2020

2. Pull the magazine catch spring up until it is above the magazine

release, using a punch to catch the top loop of the spring.

NOTE: The spring does not need to be removed from the frame to

remove the magazine release, removing the spring makes reassembly

more difficult.

3. Slide the magazine release out of the grip.

11.7.1 INSTALLING THE MAGAZINE RELEASE

1. If the magazine catch spring has been removed from the frame, use

your index finger to slide the spring into the slot starting at the top

front of the magazine well. The hooked ends of the magazine catch

spring should face the interior of the magazine well. Use your finger to

start one side of the magazine catch spring into the slot and compress

the spring with your finger to start the other side of the spring into

the slot.

2. Slide the magazine release into the grip with the beveled surface

below the locking surface facing down and the slot in the magazine

release aligned with the magazine release spring slot.

3. Press the magazine catch spring down and through the magazine

release until the hooked end is even with the top surface of the

magazine release.

4. Actuate the magazine release to ensure it operates freely and the

magazine is released when it is pressed.