Manual

26 27
POINTED IN A SAFE DIRECTION. FAILURE TO FOLLOW
THESE WARNINGS COULD RESULT IN SERIOUS INJURY
OR DEATH.
The SCAR buttstock module has side folding capabilities and is adjustable
for length of pull (LOP) and cheek rest height to allow the stock
to be adjusted to fit the size of the operator.
17.1. FOLDING THE BUTTSTOCK MODULE
1. Press the buttstock lock to release it from the backplate (Figure 14).
2. Fold the buttstock to the right (Figure 15).
4. With the magazine removed and
the chamber empty, close the
bolt. Make certain the “safety”
selector is in the on safe position
and properly store your rifle.
15.2. UNLOADING THE MAGAZINE
Unload the magazine by pushing the
cartridges, one at a time, forward
and out of the magazine.
16. MOUNTING ACCESSORIES
BEFORE MOUNTING A SCOPE, SIGHT OR OTHER
ACCESSORIES ON YOUR RIFLE, PLACE THE “SAFETY”
SELECTOR IN THE ON SAFE POSITION. REMOVE THE
MAGAZINE, LOCK OPEN THE BOLT AS EXPLAINED IN
SECTION 10.2. AND MAKE CERTAIN THE CHAMBER IS
COMPLETELY UNLOADED. KEEP THE MUZZLE POINTED IN A
SAFE DIRECTION. FAILURE TO FOLLOW THESE WARNINGS
COULD RESULT IN SERIOUS INJURY OR DEATH.
The SCAR receiver is machined with a MIL-STD 1913 rail for optics
mounting on top, along with three accessory MIL-STD 1913 rails in the
fore-end area positioned at 3, 6 and 9 o’clock.
17. BUTTSTOCK MODULE
BEFORE PERFORMING STOCK ADJUSTMENT PROCEDURES,
PLACE THE “SAFETY” SELECTOR IN THE ON SAFE
POSITION. REMOVE THE MAGAZINE, LOCK OPEN THE BOLT
AS EXPLAINED IN SECTION 10.2. AND MAKE CERTAIN THE
CHAMBER IS COMPLETELY UNLOADED. KEEP THE MUZZLE
FIGURE 16
Ensure the buttstock is locked.
FIGURE 17
Pull down and away to unlock the buttstock.
FIGURE 14
Press the buttstock lock.
FIGURE 15
Fold the buttstock.
FIGURE 13
Verify the chamber is unloaded.