Owner’s Manual 2016

the magazine bottom plate

(Figure 26). Hold the retainer

in that position and then slide

the magazine bottom plate

slightly forward (Figure 27).

3. While holding the magazine

bottom catch (which is subjected

to the force of the magazine

spring) in position, slide the

magazine bottom plate off the

magazine body and then

carefully release the magazine

spring which is under pressure.

4. Remove the magazine spring together with the follower

and retainer.

This level

of disassembly is sufficient to perform thorough cleaning

(Figure 28). Further disassembly should only be carried out by an

authorized armorer or by the FN Product Service Center.

17.5. CLEANING AND LUBRICATION OF THE MAGAZINE

1. Disassemble the magazine as shown in Section 17.4.

2. Use a soft cloth or a rag to clean

all the parts of the magazine.

3. Using a soft cloth moistened

with lubricant, lightly apply

lubricant to all the external

surfaces of the metal parts. Wipe

off excess lubricant. Ensure that

the inside of the magazine is dry.

4. Reassemble the magazine as

detailed in Section 17.6.

FIGURE 27

Slide the floorplate forward partially

to secure the magazine spring. (15-

round FNX™-45 magazine shown.)

Magazine

Body

Follower

FIGURE 28

The magazine shown

disassembled. (15-round

FNX™-45 magazine shown.)

Spring

Retainer

Floorplate