Owner’s Manual 2016

39
17.6. ASSEMbliNg tHE MAgAZiNE
1. With the components of the magazine clean, ensure that the magazine
follower and the magazine bottom catch fit correctly onto the follower
spring and that the assembly is oriented correctly.
2. Insert the magazine spring, together with the follower and retainer, into
the magazine body.
3. While holding the magazine spring in the magazine body, slide the
magazine bottom plate onto the magazine body. The magazine bottom
plate can only be slid back into position when the magazine bottom
catch is pushed far enough into the magazine body.
4. Ensure that the magazine bottom plate correctly locks into position.
18. tAkiNg CARE oF tHE piStol
Notice! NEvER AttEMpt to tAkE yoUR piStol ApARt
FURtHER tHAN ExplAiNEd iN tHiS oWNER’S MANUAl.
yoUR piStol iS A SpECiAliZEd, FiNEly FittEd
MECHANiSM. yoU MAy pERMANENtly dAMAgE it by
AttEMptiNg to diSASSEMblE tHE iNNER MECHANiSM
ASSEMbliES. iF FURtHER diSASSEMbly FoR SERviCE oR
ClEANiNg iS REqUiREd, tAkE yoUR FiREARM to A
qUAliFiEd gUNSMitH, AS ExplAiNEd iN SECtioN 24
UNdER “WARRANty, SERviCE ANd tECHNiCAl
qUEStioNS.”
Notice! yoUR piStol SHoUld bE iNSpECtEd EvERy 2000
RoUNdS ANd/oR oNCE A yEAR by A qUAliFiEd gUNSMitH
oR tHE FN pRodUCt SERviCE CENtER bECAUSE dAMAgE,
WEAR ANd CoRRoSioN ARE Not AlWAyS viSiblE FRoM tHE
oUtSidE. lAW ENFoRCEMENt ANd MilitARy pERSoNNEl
SHoUld CoNtACt tHEiR dEpARtMENtAl ARMoRER WHo
Will iNSpECt tHE piStol oN A yEARly bASiS.
39