Manualshelf

Owner’s Manual 2016

ManualsBrandsFN Herstal ManualsFirearmsFNX
41424344454647484950
4. Install the correct mounting plate, lining up the pins on the mounting
plate with the holes in the slide as shown in Figure 34 (Docter
®
) or
Figure 35 (Trijicon
®
).
5. Place the sight onto the mounting plate, lining up the holes in the sight
with the mounting plate pins.
6. Prior to final assembly, make sure the screws are the correct length,
diameter and thread.
Apply a drop of medium-strength threadlocker to the mounting screws
and tighten them with T10 Torx
®
wrench (Docter
®
) or T15 Torx
®
wrench
(Trijicon
®
).
7. Tighten #5 screws to 15 in-lbs. and 20 in-lbs. for #6 screws.
NOTICE!
DO NOT
OVERTIGHTEN THE SCREWS.
7. Assemble the pistol as described
in Section 17.3. The Trijicon
®
sight is shown on the FNX-45
Tactical in Figure 36.
8. Zero the sight according to the
manufacturers’ instructions.
FIGURE 34
Docter
®
installation.
FIGURE 35
Trijicon
®
installation.
FIGURE 36
Trijicon
®
sight installed with mounting plate.
43