User's Guide

Installing the product

1/8

1/4

Connect the product to THINKWARE DASH CAM LINK on

your smartphone and adjust the camera angle so that the

hood of the vehicle covers 1/4 - 1/8 of the screen while

viewing the live view screen, as shown in the image to

the left.

For more information about connecting and using the

THINKWARE DASH CAM LINK, refer to "4. Using the

mobile viewer" on page 24.

2.2󳒀 Installing the rear camera (optional)

Refer to the following instructions to properly install the rear camera.

2.2.1󳒀 Selecting an installation location

Select a location on the rear windshield where there

is no defrost grid wire and the camera can record

the entire rear view.

•󳒀 For vehicles with a sunshade attached to the rear windshield, you must select a location where using the

sunshade will not interfere with camera operation.

•󳒀 The adhesive part of the rear camera should not touch the defrost grid.