User's Guide

Settings
50
6.4 Setting road safety features
You can activate or deactivate a safety camera alert system, a lane departure warning system (LDWS),
a forward collision warning system (FCWS), a low speed Forward collision warning system (low speed
FCWS), and a front vehicle departure warning (FVDW) and set their options.
6.4.1 Setting the safety cameras
When the vehicle approaches or passes the speed limit zone, the safety camera alert system will collect
GPS signals and safety camera data. Refer to the following instructions to enable or disable this feature.
1
From the mobile viewer, tap Dash Cam Settings
>
Road Safety Settings.
2
From Safety Cameras, select Enabled or Disabled. The new setting is applied automatically.
6.4.2 Setting the mobile zone alert
Follow the instructions to turn on or off the mobile zone alert.
1
From the mobile viewer, tap Dash Cam Settings
>
Road Safety Settings.
2
From Mobile Zone Alert, select Enabled or Disabled. The new setting is applied automatically.
6.4.3 Identifying the vehicle type
Refer to the following instructions to initialize the ADAS calibration setting.
1
From the mobile viewer, tap Dash Cam Settings
>
Road Safety Settings.
2
From Vehicle Type, select your vehicle’s type. The new setting is applied automatically.
6.4.4 Initializing the ADAS calibration setting
Refer to the following instructions to identify your vehicle type for using the ADAS feature.
1
From the mobile viewer, tap Dash Cam Settings
>
Road Safety Settings and tap the Reset button under
Initialize ADAS.
2
From Initialize ADAS, tap Confirm to proceed with initializing. Tap Cancel to cancel initializing.