User's Guide

Using recording features
23
3.7 Using the Super night vision feature
With the Super Night Vision feature, you can record videos that are much brighter than videos recorded
without this feature. This feature is enabled by real-time image signal processing (ISP) to improve the
brightness of videos recorded.
<When Super Night Vision is deactivated> <When Super Night Vision is activated>
1
From the mobile viewer, tap Dash Cam Settings
>
Record Settings.
2
From Super Night Vision, select the desired recording mode to use the Super Night Vision feature. The
new setting is applied automatically.
3.8 Using the road safety features
The road safety features include a safety camera alert system, a lane departure warning system (LDWS),
a lane departure warning system speed (LDWS Speed), a forward-collision warning system (FCWS), a low
speed Forward collision warning system (low-speed FCWS), and a front vehicle departure warning (FVDW).
Safety feature Description
LDWS
(Lane Departure Warning)
Detects the lane departure via the real-time video and warns the driver.
LDWS Speed
Detects lane departure and warns the driver when the speed of the vehicle goes
over the speed selected in the settings.
FCWS
(Forward Collision Warning)
Detects forward collision threats via the real-time video and warns the driver when
the vehicle is moving at 40 km/h or above.
Low Speed FCWS
Detects forward collision threats via real-time video and warns the driver when the
vehicle is moving at 10-30 km/h.
FVDW
(Front Vehicle Departure
Warning)
Detects the departure of another vehicle that was previously stationary in front of the
vehicle and notifies the driver after four seconds.
RCWS
(Rear Collision Warning)
Detects rear collision threats via the real-time video and warns the driver
when the vehicle is moving at 40 km/h or above.
Road safety features are performed differently depending on the set speed and sensitivity of the features.