Installation Guide

Product Data Sheet
FOAMULAR
®
150
Extruded Polystyrene (XPS) Rigid Foam Insulation
act as a solar collector, raising the
temperature of the foam under
the print to an unacceptable level.
Provide a nal nish covering
or temporary white opaque
covering to avoid possible damage
when dark (non-white) surfaces
are used over FOAMULAR
®
XPS Insulation. Do not cover
FOAMULAR
®
XPS Insulation
either stored (factory wrapped or
unwrapped), or partially installed,
with dark colored (non-white),
or clear (non-opaque) coverings
and leave it exposed to the
sun. Examples of such coverings
include but are not limited
to lter fabrics, membranes,
temporary tarps, clear
polyethylene, etc. If improperly
covered, and exposed to the right
combination of sun, time and
temperature, FOAMULAR
®
XPS
Insulation deformation damage
may occur rapidly. See Owens
Corning publication number
10015704, “Heat Build Up Due
to Solar Exposure” for more
information.
Standards, Codes Compliance
• Meets ASTM C578 Type X
• UL Classied. A copy of UL
Classication
Certicate U-197
is available at
www.owenscorning.
com
• See UL ER8811-01 at UL.com
• ASTM E119 Fire Resistance
Rated Wall Assemblies. See
www.owenscorning.com for
details.
• Meets California Quality
Standards; HUD UM #71A
• Compliance verication by
RADCO (AA-650)
Certications and Sustainable
Features of FOAMULAR
®
XPS Insulation
• FOAMULAR
®
XPS Insulation
is reusable
• FOAMULAR
®
XPS Insulation
is made with a zero ozone
depletion formula
• Certied by SCS Global
Services to contain a minimum
of 20% recycled content
• Certied to meet indoor air
quality standards under the
stringent GREENGUARD
Certication Program, and
GREENGUARD Gold
Certication Program
• Qualied as an ENERGY
STAR
®
product, under the
U.S. Environmental Protection
Agency and the U.S.
Department of Energy
Product and Packaging Data
FOAMULAR
®
150 Extruded Polystyrene (XPS) Rigid Foam Insulation
Material Packaging
Extruded polystyrene closed cell foam, ASTM C578 Type X, 15 psi minimum Shipped in poly-wrapped units with individually wrapped or banded bundles.
Thickness
(in)
Product Dimensions
Thickness (in) x Width (in)
x Length (in)
Pallet (Unit) Dimensions
(typical) Width (ft) x
Length (ft) x Height (ft)
Square
feet per
Pallet
Board
feet per
Pallet
Bundles
per
Pallet
Pieces
per
Bundle
Pieces
per
Pallet Edges
1 1 x 24 x 96 4 x 8 x 8 3,072 3,072 8 24 192
Square Edge,
Scored Square
Edge, Tongue &
Groove
1 x 24 x 96 4 x 8 x 8 3,072 3,072 8 24 192
1 x 48 x 96 4 x 8 x 8 3,072 3,072 8 12 96
1 x 48 x 96 (Half unit) 4 x 8 x 4 1,536 1,536 4 12 48
1 x 48 x 108 4 x 9 x 8 3,456 3,456 8 12 96
1½ 1.5 x 24 x 96 4 x 8 x 8 2,048 3,072 8 16 128
1.5 x 48 x 96 4 x 8 x 8 2,048 3,072 8 8 64
2 2 x 24 x 96 4 x 8 x 8 1,536 3,072 8 12 96
2 x 48 x 96 4 x 8 x 8 1,536 3,072 8 6 48
2½ 2.5 x 48 x 96 4 x 8 x 8 1,152 2,830 4 9 36
3 3 x 24 x 96 4 x 8 x 8 1,024 3,072 8 8 64
3 x 48 x 96 4 x 8 x 8 1,024 3,072 8 4 32
1. Available lengths and edge congurations vary by thickness. See www.foamular.com for current offerings. Other sizes may be available upon request. Consult your local
Owens Corning representative for availability.