Instructions / Assembly

0. GENERAL INFORMATION
This Safe Use Instruction Sheet is the document provided by Owens Corning to communicate safe handling and use instructions
for manufactured articles neither regulated by OSHA Hazard Communication Standard, 29 CFR 1910.1200 nor by the Canada
Hazardous Products Regulation SOR/2015-17 (WHMIS 2015).
1. IDENTIFICATION
Product Name
FOAMULAR® Extruded Polystyrene Insulation - Zero Ozone Depletion Formula
Synonyms
Buoyancy Billet, Foamular® 150, Foamular® 250, Foamular® 350, Foamular® 400,
Foamular® 404, Foamular® 600, Foamular® 604, Foamular® 1000, Foamular® C-200,
Foamular® C-300, Foamular® CodeBord®, Foamular® Cel-Lok®, Foamular® CW15,
Foamular® CW25, Foamular® High-R CW Plus, Foamular® LT30, Foamular® LT40,
Foamular® 404RB, Foamular® 604RB, Foamular® AgTek, Foamular® PROPINK®,
Foamular® DURAPINK®, Foamular® PINKCORE®, Foamular® PINKCORE® TT,
Foamular® Half-Inch, Foamular® INSULPINK®, Foamular® THERMAPINK®, Foamular®
DURAPINK® FA, Foamular® DURAPINK® Plus, Foamular® INSULPINK® - Z, Foamular®
THERMAPINK® 18, Foamular® THERMAPINK® 25, Foamular® THERMAPINK® 40,
Foamular® THERMAPINK® 60, Foamular® Extruded Polystyrene, Foamular® Insulating
Sheathing, Foamular® INSUL-DRAIN®, Fabrication Billet, ProPink® Fanfold, Fanfold DWB,
TRUFOLD® Fanfold
Product Code
OCFI00001
Recommended Use
No information available
Company Phone Number
1-800-GET-PINK or 1-800-438-7465
24 Hour Emergency Phone Number
Chemtrec 1-800-424-9300
Emergency Telephone
1-419-248-5330 (after 5 pm ET and weekends)
E-mail address
[e-mail]
Company Website
http://owenscorning.com/
2. HAZARDS IDENTIFICATION
OSHA Regulatory Status
This product is considered an article. 29 CFR 1910.1200(c) definition of an article is as
follows: "Article" means a manufactured item other than a fluid or particle: (i) which is
formed to a specific shape or design during manufacture; (ii) which has end use function(s)
dependent in whole or in part upon its shape or design during end use; and (iii) which under
normal conditions of use does not release more than very small quantities, e.g., minute or
trace amounts of a hazardous chemical (as determined under paragraph (d) of this section),
and does not pose a physical hazard or health risk to employees.
WHMIS Regulatory Status
This product is considered an article per the Canadian Hazardous Products Regulation
SOR/2015-17.
Manufactured articles which meet the definition of the Canadian Hazardous Products Act
(any article that is formed to a specific shape or design during manufacture, the intended
use of which when in that form is dependent in whole or in part on its shape or design, and
_____________________________________________________________________________________________
Page 1 / 4
Manufacturer Address
Owens Corning Foam Insulation, LLC
One Owens Corning Parkway
Toledo, Ohio 43659
Version 2
SAFE USE INSTRUCTION SHEET
Creation Date 05-Mar-1997 Revision Date 30-Nov-2015