User Manual

20
SHAPE
™
User Manual
System SHAPE 40 SHAPE 50 SHAPE 65 SHAPE TWIN
• Frequency response (+/-3dB) 60Hz - 35kHz 50Hz - 35kHz 40Hz - 35kHz 40 Hz - 35 kHz
• Maximum SPL (musical signal)
102dB SPL
(pic @ 1m)
106dB SPL
(pic @ 1m)
109dB SPL
(pic @ 1m)
110,5dB SPL
(pic @ 1m)
Electronic section
• Inputs/
Impedance
Type XLR: balanced 10kOhms
Connectors RCA: unbalanced 10kOhms with sensitivity compensation
• Midrange and low frequency
amplifier
25W, class AB 60W, class AB 80W, class AB 2 x 80W, class AB
• High frequency amplifier 25W, class AB 25W, class AB 25W, class AB 50W, class AB
• Automatic
standby
Standby on After approximately 30 minutes with no signal
Standby o Signal detection > 3 mV
• Electrical
supply
Voltages
220-240V
(T500mAL / 250V
fuse) or 100-120V
(T1.6AL / 250V
fuse)
220-240V
(T800mAL / 250V
fuse) or 100-120V
(T1.6AL / 250V fuse)
220-240V
(T1AL / 250V fuse)
or 100-120V
(T2AL / 250V fuse)
220-240V (fuse
T2AL / 250V) or
110-120V (fuse
3,15AL / 250 )
Connection IEC plug and detachable power cord
• Settings
High pass filter
Adjustable Full
range / 80Hz
Adjustable Full range 45/60/90Hz
Bass
(0 - 250Hz)
Adjustable, +/-6dB
Midrange/bass
(160Hz, Q=1)
Adjustable, +/-3dB
High (4.5 -
35kHz)
Adjustable, +/-3dB
Power On/
Power O
On/o switch on rear panel
• Standby consumption < 0.5W
• Displays and controls LED for power on/o and standby
Transducers
• Woofer
10cm (4")
Flax cone
13cm (5")
Flax cone
16,5cm (6.5")
Flax cone
2 x 13cm (5")
Flax cone
• Tweeter 25mm (1") 'M' profile Aluminum-Magnesium
Cabinet
• Construction 0.5" (12mm) MDF 0.6" (15mm) MDF
• Finish Vinyl, real walnut and black paint
• Dimensions with four rubber
feet (HxWxD)
257 x 161 x 200mm
(10.1 x 6.3 x 7.9")
312 x 191 x 242mm
(12.3 x 7.5 x 9.5")
355 x 218 x 285mm
(14 x 8.6 x 11.2")
478 x 211 x 279mm
(18.8 x 8.3 x 11")
• Weight 5kg (11lb) 6,5kg (14.3lb) 8,5kg (18.7lb) 11kg (24lb)